Method of cleaning cooling tower filler

Cooling tower filler cleaning method (a):

1, manually sweep the cooling tower off the scale slag;.

2, with a high-pressure water gun repeatedly rinse the filler, remove the sludge under the cleaning scale and so on;.

3, with about 50 ℃ hot water will be TNB safe and efficient descaling agent dissolved with a rinse pump repeatedly rinse filler, until the scale rinse clean (if the filler is used for a long period of time, caused by aging and collapse, it is recommended that the replacement of filler), and at the same time to join the sterilization agent, thoroughly kill biological algae and bacteria; 4, to confirm that all parts of the system are cleaned; and the cooling tower, the cooling tower, the cooling tower, the cooling tower, the cooling tower and other parts of the system.

4、Confirm that all parts of the system are clean, drain the sewage.

5、With water to rinse the packing and tower body inside and outside.

6、Restore all parts of the system, replenish water can be used.

7、After all the restoration, ask Party A management personnel acceptance.

8, the evacuation of party B items, clean up the site health.

Cooling tower packing cleaning method (II):

1, temporary use of plastic sheeting to build a large pool.

2, will be added to the cleaning agent in the water.

3, the filler from the cooling tower removed into the pool of soaking.

4, the soaked filler with clean water rinse clean and loaded back to the cooling tower.

5, with a cloth with adhesive agent on the cooling tower water refill, the mouth of the water refill soaked dredged;.

6, with the same method to remove the cooling tower chassis scale clean.

7, with water to rinse the filler and tower inside and outside.

8、Restore the system everywhere, replenish water can be used.