News
How to solve the glass fiber reinforced plastic cooling tower noise and vibration problems
2023-11-20
In our use of the cooling tower in the process, more or less abnormal things will happen, such as abnormal noise and oscillation, this is not the glass fiber reinforced plastic cooling tower itself, but the lack of daily protection of the cooling tower caused by the lack of, if in the usual use of the cross-flow cooling tower occurs in the above mentioned failures, you can refer to the disposal.
Abnormal noise and oscillation of the end:
1, the wind blade touches the wind carcass wall
2, wind blade installation is not appropriate
3, fan car not public balance
4, reduce the speed of the machine lubricant oil is too small
5, bearing failure (motor or reduce speed machine)
Corresponding to the fault end by measures:
1, debugging the length of the wind blade
2, from the new installation fan car, and from the new lock nut
3、Calibrate the angle of wind blade
4、Replenish the oil to the specified oil level.
5、Replacement of bearings
Key words:
Previous:
Related News
Hardness of fiberglass cooling tower
2023-11-20
Method of cleaning cooling tower filler
2023-11-20
Criteria for making cooling tower filler
2023-11-20